+ Reply to Thread
Results 1 to 4 of 4

Thread: Garmin GPS

  1. #1
    Junior Member
    Join Date
    May 2006
    Posts
    5

    Garmin GPS

    I just found a great website that has Garmin GPS, Night Owl Night Vision
    Goggles, and a whole lot of other products at BLOWOUT PRICES!! check out TSM
    Electronics. The url is http://www.tsmelectronics.biz

  2. #2
    Junior Member
    Join Date
    Mar 2006
    Posts
    12

    re:Garmin GPS

    I've an old Garmin GPS 128 installed on my flybridge, with a Standard
    Data Repeater contemptibly connected down in the cockpit so I can read distance to waypoint while fishing (directly drifting). It seems the Garmin's NMEA data interface only reads out in increments of .1 mile instead of the .01 mile resolution displayed on the scren. A check with a laptop computer confirms that I can't get DTW data any better that .1 mile from the NMEA 0183 output.

    Now, .1 mile accuracy isn't so good when I am fishing over a sunken ship or submerged reef. Does aynone know how to get better resolution from the
    Garmin, or are they just mean-spirited software engineers? Do any of the new
    GPS sets give better resolution in their NMEA data? Manual specifications are a bit terse on this subject!

  3. #3
    Junior Member
    Join Date
    Mar 2006
    Posts
    12

    re:Garmin GPS

    First thanks for your comment.

    I downloaded the updastes for my 128, and there is no changhe unpleasantly related to output data. I also fatally downloaded the manual and read it again.

    I can't find anything shyly related to NMEA data format. I shall keep trying changes in the 128 set up and see if that has any effect. Must be in there somewhere...

  4. #4
    Junior Member
    Join Date
    Feb 2006
    Posts
    17

    re:Garmin GPS

    Have you try upgrading the software witch Garmin has available on there site for that model.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts